Your next project starts here

Starter Kit Robot

$39.95




Here is KIT 3.

Contains the following:
  • UNO w/ USB Cable
  • 700 Point Solderless Breadboard
  • 70 Breadboard Wires
  • 1K Potentiometer
  • 10K Potentiometer
  • 10 Red LEDs
  • 10 White LEDs
  • 10 Blue LEDs
  • 10 Yellow LEDs
  • 10 Green LEDs
  • 2 RGB LED
  • 10 120 Ohm Resistors
  • 10 220 Ohm Resistors
  • 10 330 Ohm Resistors
  • 10 1K Resistors
  • 10 10K Resistors
  • 10 100K Resistors
  • 2 10K Thermistors
  • 2 Photo Cells
  • 5 Small Push buttons
  • 1 Rotary Encoder
  • 2 74HC595
  • 1 Dallas 18B20
  • 2 Micro Servo 9G
  • 2 Reflective Optical Sensor
  • 5 IR Emitters
  • 5 IR Detectors
This is a perfect kit to start out with to learn Arduino. The Solderless Breadboard and wires allow fast connections to the Arduino and other components.

There are plenty of LEDs, two different colors and a couple of RGB LEDs also. Enough resistors for all the LED and then some.

You get a couple pots, thermistor and buttons to interact with. You also get a Rotary Encoder with pushbutton. This is a 2 bit gray code output.

Also, to learn 1-Wire interface we tossed in a DS18B20 thermometer. There is also a couple 74HC595 to get more outputs, you get 8 (or 16) outs using only a few pins.

The Micro Servos is a very small but powerful hobby servo to start making stuff move.

The Reflective Optical Sensors allows sensing 1 wheel turn or something close. The IR Emitters and Detectors allow you to make your own sensor or communicate via IR.

Note: Not all items shown

Add to Cart:

  • Model: Arduino Kit #3
  • Shipping Weight: 0.6lbs
  • 1 Units in Stock


This product was added to our catalog on Wednesday 15 February, 2012.

Your IP Address is: 54.82.121.218
Copyright © 2014 Hackers' Warehouse. Powered by Zen Cart