ESP8266 Yellow Plate Flashing

ESP8266 Support information
Forum rules
No SPAM
No Advertising
No For Sale

ESP8266 Yellow Plate Flashing

Postby Tim Laren » Thu Mar 31, 2016 5:04 pm

This board has a jumper for FLASH.
You need to jumper the two pins (comes with a yellow jumper) and then reset the module.
The reset pin is the top left most pin, labeled REST.
Just quickly jumper it to GND while the FLASH Pins are jumpered.
When using the Arduino IDE I press upload, jumper FLASH and then nit the reset line.
I have enough time almost always while the program is compiling.
I have also noticed that sometimes if I don't reset it sometimes flashes anyways.
This may be when I have crashed and the WDT resets the module.
Image
Tim Laren
Site Admin
 
Posts: 137
Joined: Thu Mar 04, 2010 8:25 pm

Return to ESP8266

Who is online

Users browsing this forum: No registered users and 1 guest

cron