Someone published a nice thread on the B4A forum that used Setnotify to talk to the arduino over bluetooth 4.0, and send messages back and forth!
https://www.b4x.com/android/forum/threa ... ost-473201
Huzza!
Bluno Nano V1.3 working, b4a has a BLE libary
4 posts
• Page 1 of 1
Bluno Nano V1.3 working, b4a has a BLE libary
by tmdrake » Sun May 28, 2017 7:54 pm
- Attachments
-
- BLE - B4A_2017-05-28_19-27-34.png (53.05 KiB) Viewed 10934 times
-Dennis (TM_Drake)
http://www.tmdake.com
http://www.tmdake.com
- tmdrake
- Posts: 25
- Joined: Sat Nov 26, 2011 9:54 pm
- Location: Rancho Palos Verdes
Re: Bluno Nano V1.3 working, b4a has a BLE libary
by tmdrake » Sun May 28, 2017 7:56 pm
-Dennis (TM_Drake)
http://www.tmdake.com
http://www.tmdake.com
- tmdrake
- Posts: 25
- Joined: Sat Nov 26, 2011 9:54 pm
- Location: Rancho Palos Verdes
Re: Bluno Nano V1.3 working, b4a has a BLE libary
by Antonidis » Tue Jan 16, 2018 6:10 am
- Antonidis
- Posts: 1
- Joined: Sat Jan 06, 2018 2:45 am
Re: Bluno Nano V1.3 working, b4a has a BLE libary
by tmdrake » Tue Jan 16, 2018 9:42 am
Some reason I don't see it in the pairing panel in android but was able to connect do it with the above code. I haven't been back to this in a while so I do not know what improvement made in the last year.
-Dennis (TM_Drake)
http://www.tmdake.com
http://www.tmdake.com
- tmdrake
- Posts: 25
- Joined: Sat Nov 26, 2011 9:54 pm
- Location: Rancho Palos Verdes
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest